Bars, automatic bars - MS Elektro Olomouc

The term bars and entrance barrier refers to all the devices and solutions for checking and closing the access roads and paths leading to a fenced or otherwise confined areas, enclosed yards, gardens, etc.
By using the bars and barriers, we can also easily control the arrivals of vehicles and persons. Bars are primarily used in commercial and industrial facilities.

Exceptional functions of SIGNO4 and SIGNO6 bars

• The bar will automatically close as the vehicle passes through
• Two different types of traffic light control
• Automatic security test at the beginning of each manoeuvre
• The STOP input to connect the latest generation of the security pressure bars
• Integrated counter which can be set up to warn of the next service inspection

Properties: SIGNO4 and SIGNO6 bars

• easy connection and setting of the control unit
• easy installation - the arm may be mounted on the left or the right side
• infinitely adjustable end stops with deceleration before the termination of the manoeuvre
• intelligent adjustable reverse run, upon contact with obstacle
• operation during the power outage ensured by the integrated backup batteries (optional accessories)
• LED lamps and buffer bar may be mounted directly onto the arm (optional accessories )
• long service life and low consumption of LED technology should ensure high luminance and troublefree operation
• all-weather illumination
• traffic light control available for both the one-way and the two-way traffic
• easily controlled and protected unlocking will ensure manual control of the bar during power outage
• opening/closing speed: 2.5 - 3.5 sec
• control unit included
• anchor plate to be fastened to concrete
• in case of power outage, manual unlocking by the key
• PS224 accumulator backup available

Technical data Supply voltage 230 V AC Motor supply 24 V DC Current 1.3 A at 230V AC Motor rated current 12 A Rated motor power 300W Working cycle 80% Reduction-gear ratio 1/241 Torque 200 N/m Weight: 50 kg Operating temperature -20 to +50°C

Bar supplements remote control receiver SMXI remote controller FLO2R warning lamp BF photocells

Bar control

The bars may be operated by a remote controller, key switch, code keyboard, identification card or a push-button (intercom, gate house). Bars are programmable for automatic closing after elapse of certain time interval, or immediately after the vehicle passes through based on the impulse from the ground induction loop (detector).
Vehicle traffic is controlled by the traffic lights.
Standard delivery includes 2 channel controllers which allows you to easily and independently control 2 devices, e.g. bar and gate. Optional, we can supply you with 4 channel controllers for (independent) control of up to four devices, e.g. bars, gates, entrance gate and lighting.

Bar accessories